
 Detailed explanation of 'No Drives' comment by SmartCD:
 =========================================================
 
 When SmartCD loads, it asks the system how many drives you have configured.
 This error has arisen because the answer is zero, i.e. no drives.
 
 You *might* have drives on the icon bar if you've got (say) an early SCSI
 card, but this is not acceptable.
 
 Solution:
 =========
 
 You must configure your system so that it knows how many there are, using
 one of the following methods:
 
 1. Get the menu over a CD drive icon, and trace across Configure --> Drives,
    then set this value to however many drives you've got.
    
 2. Press F12 or <ctrl>F12 to get a command line of some sort, then type

                  *Configure CDROMdrives 'n'

                            ...where 'n' is the number of drives you have.

 You don't need to reset the machine, but you *do* need to quit and re-load
 the SmartCD program.

 [END]
  
 